Towel rail radiators KORALUX STANDARD are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.

You will find the smallest towel rail radiators on the market in this range. With a width of 400 mm they are ideal for use in small bathrooms or as an alternative heat source suitable for combination with another type of heating, for example, under-floor heating. You will appreciate the presence of this radiator in your bathroom, toilet and other small areas.

Towel rail radiators KORALUX LINEAR MAX are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.

They can also be used for combined heating.

The direct electric radiator KORALUX LINEAR MAX – E is also available.

Their design enables drying textiles. This is why KORADO now offers also towel hangers and pegs which extend the practical use of KORALUX towel rail radiators.

Towel rail radiators KORALUX LINEAR MAX – M are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. They have a bottom middle connection with connecting pitch 50 mm. They are delivered with a set for wall mounting, including an air vent and blanking plugs.

They can also be used for combined heating.

For connection of the radiator to the heating system we recommend using the Connection fittings HM.

Their design enables drying textiles. This is why KORADO now offers also towel hangers and pegs which extend the practical use of KORALUX towel rail radiators.

Towel rail radiators KORALUX LINEAR COMFORT are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.

They can also be used for combined heating.

The direct electric radiator KORALUX LINEAR COMFORT – E is also available.

Their design enables drying textiles. This is why KORADO now offers also towel hangers and pegs which extend the practical use of KORALUX towel rail radiators.

Towel rail radiators KORALUX LINEAR COMFORT – M are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. They have a bottom middle connection with connecting pitch 50 mm. They are delivered with a set for wall mounting, including an air vent and blanking plugs.

They can also be used for combined heating.

For connection of the radiator to the heating system we recommend using the Connection fittings HM.

Their design enables drying textiles. This is why KORADO now offers also towel hangers and pegs which extend the practical use of KORALUX towel rail radiators.

Towel rail radiators KORALUX LINEAR CLASSIC are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. The connecting pitch is derived from the length of the radiator. The radiators are delivered with a set for wall mounting, including an air vent and blanking plugs.

They can also be used for combined heating.

The direct electric radiator KORALUX LINEAR CLASSIC – E is also available.

Their design enables drying textiles. This is why KORADO now offers also towel hangers and pegs which extend the practical use of KORALUX towel rail radiators.

Towel rail radiators KORALUX LINEAR CLASSIC – M are produced from closed steel profiles with a D-shaped cross section and straight profiles with a circular cross section. They have a bottom middle connection with connecting pitch 50 mm. They are delivered with a set for wall mounting, including an air vent and blanking plugs.

They can also be used for combined heating.

For connection of the radiator to the heating system we recommend using the Connection fittings HM.

Their design enables drying textiles. This is why KORADO now offers also towel hangers and pegs which extend the practical use of KORALUX towel rail radiators.

The facade convectors KORASPACE by their direct location on the facade prevent penetration of the cold air into the interior space. The warm air rising from the convectors mixes with the cold air and creates a thermal screen which provides greater thermal comfort of the indoor space and prevents condensation forming on the glass surface.

• design freedom
• high-perfomance Al/Cu heat exchangers
• excellent controllability and fast heating start-up
• without heat transfer to the external facade
• additional space for placement of other through-running distribution

The heat exchangers KORABASE are the heart of convectors. However, its application is much wider. Imagine that you would like your heating elements to completely blend with the interior. Build your exchangers into materials, the entire interior of which is compactly created, and into places where you want to have them. A real design solution that will fulfi l even the most exacting notions of preserving the interior design.

Al/Cu heat exchanger with low water content KORABASE

It is suitable for individual installation, especially in places where compactness of interior is required in terms of materials used. If certain conditions are adhered to, the KORABASE heat exchangers can be covered with almost any material to integrate them unobstrusively into the space. The exchanger is made of copper pipes and aluminium lamellas.

Apart from their design the wall mounted convectors also offer many other advantages: efficient operation, higher performance with smaller dimensions, faster onset of heat You won't burn yourself with our convectors! Surface max temperature is 40 °C and the heat is transferred to the space of the room, and not into the wall PLAN – design solution of wall mounted convector with flat front panel.

The wall mounted convectors KORAWALL are standard wall mounted convectors with a long history, used in households as well as in commercial premises the modern design, easy mounting and economical operation are the reasons why they are so popular with our customers With regard to the unique design of the heat exchanger used they achieve higher outputs even with small dimensions of the element the great advantage of the wall mounted convectors KORAWALL is their very low surface temperature of 40 °C and no heat dissipation into the wall.