Zinc-coated panel radiators RADIK are intended for rooms with a high risk of corrosion because of high humidity or chemically aggressive environment. Resistance to corrosionis increased with a layer of zinc coating which slows down the corrosion process and results in an extended life of the radiator.

RADIK VK - Z  is a steel panel radiator in VENTIL KOMPAKT version which allows right bottom connection to a pressurized heating system. There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1800 mm and more have six hangers.

RADIK COMBI VK is a panel radiator in VENTIL KOMPAKT design allowing a right bottom connection to the pressurized heating system.

RADIK COMBI VK is designed for a combined installation with an electric heating element. This combination makes this panel radiator suitable for combined heating (hot water - electricity) which can be used independently from the operation of the heating system. On the part of the electric installation the electric heating element does not require any special arrangements in the heated room. It is recommended to be installed together with the radiator.

There are two upper and two lower hangers welded at the back of the radiator. Blanking plugs, an air vent and a valve with a preset flow rate covered by a plastic cap are delivered as standard.

The concept of RADIK VKM radiators is based on the VENTIL KOMPAKT design. The original design of the inside distribution pipes allows the bottom middle connection of the radiator to the heating system. There are two upper and two lower hangers welded at the back of the radiator. Radiators in length 1800 mm and more have six hangers.

RADIK VKM panel radiators are designed for use in modern pressurized heating systems with horizontally led distribution pipelines either under the radiator, in the floor or in the wall.

The design of the RADIK VKM radiator is patent-protected.

RADIK VKU is a steel panel radiator in VENTIL KOMPAKT version which allows left or right bottom connection to a pressurized heating system. There are no hangers welded at the back side of the radiator therefore the radiators in types 21, 22 and 33 can be turned.

Note: Type 33 VKU does not have symmetrically placed connections in relation to the depth of the radiator.

When mounting the radiator on the wall it is necessary to use the "Compact bracket Plus" (see the KORAMONT catalogue).

RADIK RC VKU represents a significant innovation in the world of heating. It is the first radiator with controlled flow which enables a full closing of the water flow through the back panel of the radiator. Therefore it is possible to use a higher share of radiant heat from the front panel for 87% of the heating season, achieve the desired thermal comfort at a lower air temperature in the room and thus save up to 15% of the annual heating costs.

RADIK RC VKU is a panel radiator in the version RC and in the version VENTIL KOMPAKT which allows a right or left bottom connection to the heating system with a forced circulation. There are no hangers welded at the *back side of the radiator therefore the radiators in types 20, 21, 22 and 33 can be turned.

RADIK RC PLAN VK represents a significant innovation in the world of heating. It is the first radiator with controlled flow which enables a full closing of the water flow through the back panel of the radiator. Therefore it is possible to use a higher share of radiant heat from the front panel, achieve the desired thermal comfort at a lower air temperature in the room and thus save up to 15% of the annual heating costs.

RADIK RC PLAN VK is a panel radiator with a flat front panel in the version RC and in the version VENTIL KOMPAKT which allows a right bottom connection to the heating system with a forced circulation. There are no hangers welded at the back side of the radiator.

RADIK RC PLAN VKL represents a significant innovation in the world of heating. It is the first radiator with controlled flow which enables a full closing of the water flow through the back panel of the radiator. Therefore it is possible to use a higher share of radiant heat from the front panel, achieve the desired thermal comfort at a lower air temperature in the room and thus save up to 15% of the annual heating costs.

RADIK RC PLAN VKL is a panel radiator with a flat front panel in the version RC and in the version VENTIL KOMPAKT which allows a left bottom connection to the heating system with a forced circulation. There are no hangers welded at the back side of the radiator.

RADIK RC LINE VK represents a significant innovation in the world of heating. It is the first radiator with controlled flow which enables a full closing of the water flow through the back panel of the radiator. Therefore it is possible to use a higher share of radiant heat from the front panel for 87% of the heating season, achieve the desired thermal comfort at a lower air temperature in the room and thus save up to 15% of the annual heating costs.

The model RADIK RC LINE VK is a panel radiator with a flat front panel with fine horizontal grooves, in the version RADIK RC and in the version VENTIL KOMPAKT, which allows a right bottom connection to the heating system with a forced circulation. There are no hangers welded from the back side.