The modern housing demands space, airiness and light. Floor convectors occupy no place in the interior while ensuring perfect thermal comfort even in places with higher heat losses such as French windows and accesses to balconies. The KORAFLEX FI/FW floor convectors with the fan will achieve not only pleasant interior temperature in winter, but also nice cooling in summer.

• high heating and cooling output
• possibility of control through BMS (Building Manager System)
• very quiet operation
• energy saving fans

RADIK HYGIENE VK is a panel radiator in VENTIL KOMPAKT version which enables right bottom connection to the pressurized heating system.

It is suitable for installation and operation in rooms with high demands on hygiene and cleanness. All types are without convector fins; they have a flat front panel and the seam welds are covered with a special flat strip. The type 20S has got a bigger spacing between the panels (radiator depth B = 102 mm) as compared to the standard spacing of type 20 (B = 66 mm).

There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1 800 mm and more have six hangers. An air-vent and blanking plugs are delivered as standard. We recommend using the drill-in brackets (type 18/120 – see the KORAMONT catalogue) which enable to mount the radiator in a distance of up to 65 mm from the wall.

RADIK HYGIENE is a panel radiator in KLASIK version which allows left or right side connection to pressurized or gravity-fed heating systems. 

It is suitable for installation and operation in rooms with high demands on hygiene and cleanness. All types are without convector fins; they have a flat front panel and the seam welds are covered with a special flat strip. The type 20S has got a bigger spacing between the panels (radiator depth B = 102 mm) as compared to the standard spacing of type 20 (B = 66 mm).

There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1 800 mm and more have six hangers. An air-vent and blanking plugs are delivered as standard. We recommend using the drill-in brackets (type 18/120 – see the KORAMONT catalogue) which enable to mount the radiator in a distance of up to 65 mm from the wall.

RADIK CLEAN VK  is a steel panel radiator in the VENTIL KOMPAKT version which allows a bottom right connection to the heating system. It is designed for pressurised heating systems.

It has been modified for installation and operation in rooms with higher demands on hygiene and cleanness. All types are supplied without convector fins, top grills and side panels.

There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1800 mm and more have six hangers. An air vent and blanking plugs are delivered as standard. We recommend using the drill-in brackets (type 18/120 – see the KORAMONT catalogue) which enable to mount the radiator in a distance of up to 65 mm from the wall.

RADIK CLEAN is a steel panel radiator in the KLASIK version which allows a left or right side connection to the heating system. It is designed for pressurised or gravity-fed heating systems.

It has been modified for installation and operation in rooms with higher demands on hygiene and cleanness. All types are supplied without convector fins, top grills and side panels.

There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1800 mm and more have six hangers. An air vent and blanking plugs are delivered as standard. We recommend using the drill-in brackets (type 18/120 – see the KORAMONT catalogue) which enable to mount the radiator in a distance of up to 65 mm from the wall.

RADIK PLAN VERTIKAL - M is a vertically aligned panel radiator with a flat front panel. It enables a bottom middle connection to pressurised heating systems. It is equipped with 6 connections with a G½ inside thread. There are two upper and two lower hangers welded at the back side of the radiator. Radiators in type 20 and in lengths of 600 and 900 mm have one extra hanger welded at the top.

For connecting to the heating system we recommend using the Integrated Fitting HM supplied with a thermostatic head and on request also with a plastic cover – for more details see please our brochure HM Fittings.