RADIK HYGIENE VK - Steel panel radiator for rooms with high demands on hygiene and cleanness, with flat front panel and right bottom connection

0886 901 727 0885 724 677

info@amigobg.com

Amigobg.com

Visit our online store

RADIK HYGIENE VK - Steel panel radiator for rooms with high demands on hygiene and cleanness, with flat front panel and right bottom connection

VERSION HYGIENE AmigoBG Tuesday, 26 September 2017 20:25

Rate this item

(0 votes)

font size decrease font size increase font size
Print
Email

RADIK HYGIENE VK is a panel radiator in VENTIL KOMPAKT version which enables right bottom connection to the pressurized heating system.

It is suitable for installation and operation in rooms with high demands on hygiene and cleanness. All types are without convector fins; they have a flat front panel and the seam welds are covered with a special flat strip. The type 20S has got a bigger spacing between the panels (radiator depth B = 102 mm) as compared to the standard spacing of type 20 (B = 66 mm).

There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1 800 mm and more have six hangers. An air-vent and blanking plugs are delivered as standard. We recommend using the drill-in brackets (type 18/120 – see the KORAMONT catalogue) which enable to mount the radiator in a distance of up to 65 mm from the wall.

RADIK HYGIENE VK - Steel panel radiator for rooms with high demands on hygiene and cleanness, with flat front panel and right bottom connection

Additional Info

Technical Data
Height (H): 503, 603, 703 mm
Length (L): 404, 504, 604, 704, 804, 904, 1004, 1104, 1204, 1404, 1604, 1804, 2004 mm
- Type 10: 49 mm
- Type 20: 102 mm
- Type 33: 157 mm
Connecting pitch: 50 mm
Connecting thread: 6 × G½ inside
Highest allowed working pressure: 10 bar
Highest allowed working temperature (°C): 110 °C
Radiator connection: right bottom
Pressure Loss: In case of two-pipe heating system it is necessary to calculate the correct level of valve presetting and specify this in the project documentation to ensure a proper function of the heating system. This must be kept by the installer during installation of the heating system.